Auxiliary Equipment
Chillers, heat exchangers, iron removers, diaphragm pumps and grinding media that complete the production system.
Auxiliary equipment completes a grinding system: chillers supplying 5–15 °C coolant (down to −15 °C in winter operation), plate heat exchangers, electromagnetic and permanent-magnet iron removers, pneumatic diaphragm pumps and yttria-stabilised zirconia grinding beads from 0.1 to 2.2 mm.

Cooling-water Machine (Chiller)
Low-temperature chiller with glycol carrier providing 5-15 °C chilled liquid, operable down to -15 °C in winter.
View series
Plate Heat Exchanger
High-efficiency plate heat exchanger, 3-5× shell-and-tube performance with over 90% heat recovery.
View series
Iron Remover (Electromagnetic / Permanent Magnetic)
Electromagnetic and permanent-magnetic iron removers for separating magnetic impurities from fluid materials.
View series
Pneumatic Diaphragm Pump
QGB air-driven diaphragm pump with adjustable flow, explosion-proof design and full gas/liquid separation.
View series
Grinding Media Series (Zirconia Beads)
Yttrium-stabilized zirconia beads, 95% ZrO₂+Y₂O₃, 0.1-2.2 mm, for contamination-free high-efficiency grinding.
View seriesAuxiliary equipment questions.
What auxiliary equipment does a bead mill line need?
Besides the mills and tanks, a line typically needs a chiller for low-temperature cooling, heat exchangers, iron removers for magnetic impurities, diaphragm pumps to transfer slurry and grinding media. INFOR supplies all of these with its lines.
What zirconia grinding beads does INFOR supply?
INFOR supplies yttrium-stabilized zirconia beads (ZrO₂ ≥95%, Y₂O₃ ≥5%) from 0.1 to 2.2 mm, with a true density of 6.03 g/cm³ and a bulk density of 3.75 g/cm³. The fine microstructure and smooth surface reduce bead wear, and beads can be customized.
How are magnetic impurities removed from slurry?
An AF fluid iron remover places a magnetic steel group inside a sleeve in the slurry flow to capture magnetic impurities. The frame is rated at 1.0 MPa, and for cleaning the magnet retracts and the captured impurities are released through a three-way valve slag outlet.
Compare another grinding process.
Start with your material.
Share the material, target particle size and required output. INFOR offers material trials, process planning and equipment recommendations.
Test Your Material