LFP cathode lines, conductive paste plants and coatings dispersion, from single mills to complete production lines.
Powder-to-slurry LFP installations from 8,500 t/y up to 100,000 t/y, running NCT turbine and NCP pin sand mills.
A complete powder-to-slurry line for lithium iron phosphate cathode material. Dosing, pre-mixing, homogenizing, fine grinding and iron removal run as one continuous process, with the grinding stage sized for a 100,000 t/y output.
A 60,000 t/y lithium iron phosphate project delivered together with a pilot line, so the customer can validate formulations at small scale on the same process before committing to production batches.
A 50,000 t/y line running multi-stage circulation grinding for a uniform particle-size distribution, with closed-loop temperature control across the whole mill train.
A mid-scale lithium iron phosphate line built around 400L and 150L turbine sand mills, covering cathode slurry preparation through to storage.
A 20,000 t/y lithium iron phosphate line configured for continuous operation, with online iron removal ahead of storage to protect cell performance.
An 8,500 t/y installation using 500L sand mills. Sized for a compact footprint, it keeps the same grinding and iron-removal stages as our larger lines.
400L vertical sand mills installed on site. The screen-free vertical design lets a line skip a coarse-grinding stage and go straight to fine grinding, which cuts both equipment count and build cost.
A 500L pin sand mill running in production. The pin-rod rotor and permanent-magnet drive deliver high flow with lower energy consumption per tonne of slurry.
High-solid-content conductive paste installations built around 90L horizontal mills and closed-loop dispersion.
A 10,000 t/y carbon nanotube conductive paste line that pairs high-shear pre-dispersion with multi-stage nano grinding, reaching single-tube-level dispersion at high solids content.
90L horizontal sand mills running conductive agent slurry, with dynamic screen discharge for high flow and a rotor designed specifically for carbon nanotube pastes.
A carbon nanotube conductive paste installation built as a closed loop, from dispersion through to filtration and deaeration before filling.
Continuous dispersion and grinding lines for water-based and oil-based coatings, inks and pigments.
A continuous dispersion and grinding line for water-based and oil-based coatings, inks and pigments, combining multi-stage sand milling with closed-loop quality control.
Share the material, target particle size and required output. INFOR offers material trials, process planning and equipment recommendations.
Talk to an EngineerHi, I’m INFOR AI. Ask me about products, materials, particle size, capacity, or project solutions.