Iron Remover (Electromagnetic / Permanent Magnetic)
Electromagnetic and permanent-magnetic iron removers for separating magnetic impurities from fluid materials.

The equipment consists mainly of electrical control, the AF fluid iron remover and piping. The AF fluid iron remover uses an internal magnetic steel group, cylinder and frame, the frame adopts pressure-bearing design with a 1.0 MPa working pressure.
What is built in.
- 01
AF fluid iron remover with magnetic steel group, cylinder and frame
- 02
Pressure-bearing frame design rated at 1.0 MPa
- 03
Magnetic steel group extends into the sleeve to magnetize the surface and capture magnetic impurities
- 04
Automatic cleaning, retracting the magnet releases captured impurities through the three-way valve slag outlet
- 05
Integrated electrical control cabinet for the iron remover, valves and pumps
Typical materials.
- Magnetic impurity removal from fluid materials
- Slurry and paste production lines
Frequently asked questions
Which materials can the Iron Remover (Electromagnetic / Permanent Magnetic) process?
The Iron Remover (Electromagnetic / Permanent Magnetic) is used for magnetic impurity removal from fluid materials and slurry and paste production lines. Whether it suits a new material depends on solids content, viscosity, hardness and whether the slurry is water- or solvent-based; send the material data sheet and target particle size and INFOR's engineers will assess it.
Which model of the Iron Remover (Electromagnetic / Permanent Magnetic) should I choose?
The Iron Remover (Electromagnetic / Permanent Magnetic) is supplied as a single configuration, so selection means confirming it matches your material, target particle size and hourly output, which INFOR verifies on laboratory or pilot equipment before the machine is confirmed.
What are the main design features of the Iron Remover (Electromagnetic / Permanent Magnetic)?
Main design features of the Iron Remover (Electromagnetic / Permanent Magnetic): AF fluid iron remover with magnetic steel group, cylinder and frame; Pressure-bearing frame design rated at 1.0 MPa; Magnetic steel group extends into the sleeve to magnetize the surface and capture magnetic impurities; Automatic cleaning, retracting the magnet releases captured impurities through the three-way valve slag outlet.
Get a quotation.
Tell us the material, target D50/D90 and hourly output. We reply within 24 hours with a model recommendation.
Test Your Material

