Special-Purpose Bead Mills

Also known as: special-purpose sand mills

Application-specific mills for dry milling, carbon nanotube conductive paste and battery coating slurries.

Special-purpose bead mills are each configured for one application: dry milling of powders to 1–10 µm at 5–500 kg/h; carbon nanotube conductive paste, with a CNT-specific rotor and dynamic-screen discharge (NCT-15 to NCT-150); and battery coating slurries at 500–5000 nm.

Model comparison

11 models side by side.

Figures from the current product catalogue. Final configuration depends on your material and process.

ModelSeriesMotor Power (kW)Grinding Chamber Volume (L)Grinding Media (mm)Feed Flow (L/h)Production Capacity (kg/h)
2LDry Bead Mill Series7.52, , 5-20
25LDry Bead Mill Series2225, , 40-80
60LDry Bead Mill Series4560, , 100-180
150LDry Bead Mill Series90150, , 300-500
NCT-15Carbon Nanotube Conductive Paste Bead Mill Series2215, , ,
NCT-30Carbon Nanotube Conductive Paste Bead Mill Series4530, , ,
NCT-90Carbon Nanotube Conductive Paste Bead Mill Series9090, , ,
NCT-150Carbon Nanotube Conductive Paste Bead Mill Series132-160150, , ,
NCP-30Coating Slurry Bead Mill Series45300.2-2.01200,
NCP-60Coating Slurry Bead Mill Series90600.2-2.03000,
NCP-150Coating Slurry Bead Mill Series132-1601500.2-2.04000,
Questions

Special-purpose bead mill questions.

What is a dry sand mill?

A dry sand mill grinds powder without water or solvent. The INFOR dry mill uses a built-in turbo classifier in a closed loop, reaches 1–10 µm with 1.0–10.0 mm media and is available with inert-gas sealed anti-explosion protection. Four models from 2 to 150 L handle 5–500 kg/h, for materials such as ferrite, silicon carbide, metal powder and solid-state electrolyte.

What makes the CNT conductive paste mill different from a standard bead mill?

It is built specifically for carbon nanotube slurry: a CNT-specific rotor, a dynamic-screen discharge for high flow, a full stainless-steel exterior against corrosion and an anti-explosion, anti-crack barrel treatment. Four models cover 15–150 L chambers.

Which mill is used for battery separator and electrode coating slurry?

The INFOR coating slurry sand mill is purpose-built for battery separator coating, electrode coating slurry and conductive paste. It works in the 500–5000 nm range with 0.2–2.0 mm zirconia beads, in 30, 60 and 150 L models.

Not sure which mill?

Start with your material.

Share the material, target particle size and required output. INFOR offers material trials, process planning and equipment recommendations.

Test Your Material