Industrial High-Pressure Homogenizer Series
Production high-pressure homogenizers from 250 to 4000 L/h at 1000-1500 bar, built for continuous industrial duty.
- Flow
- 250-4000
L/ h - Max. working pressure
- 1000-1500
bar - Motor
- 18.5-132
kW - Product viscosity
- <2000
cP - Operation
- continuous,
24/ 7
Designed for large-scale industrial production, the industrial series uses a reinforced drive system to reach up to 4000 L/h, with four layers of safety design and automated control for stable, efficient and continuous fine homogenizing.
10 models.
Figures from the current product catalogue. Final configuration depends on your material and process.
| Model | WH22-100 | WH22-150 | WH37-150 | WH37-100 | WH75-30 PLUS | WH75-35 | WH75-40 | WH110-40 PLUS | WH110-42 | WH132-45 |
|---|---|---|---|---|---|---|---|---|---|---|
| Flow Rate (L/h) | 500-600 | 250 | 600 | 1000 | 1200 | 1800 | 2200 | 2000 | 3400 | 4000 |
| Max. Working Pressure (bar) | 1000 | 1500 | 1500 | 1000 | 1500 | 1000 | 1000 | 1500 | 1000 | 1000 |
| Motor Power (kW) | 18.5 | 18.5 | 37 | 37 | 75 | 75 | 75 | 110 | 110 | 132 |
| Weight (kg) | 1265 | 1265 | 2400 | 2400 | 2400 | 2500 | 2500 | 2800 | 3900 | 4000 |
| Dimensions (mm) | 1710×1040×1155 | 1710×1040×1155 | 2060×1570×1330 | 2060×1570×1330 | 2060×1570×1330 | 2060×1570×1330 | 2060×1570×1330 | 2160×1570×1330 | 2780×1530×1430 | 2780×1530×1430 |
What is built in.
- 01
Reinforced industrial drive for 1000-1500 bar on high-viscosity, hard, fibrous or fine-particle materials
- 02
Built for continuous 24/7 operation, from a few hundred to several thousand litres per hour
- 03
Homogenizing chamber and valve parts in hardened alloys and ceramics for longer service life and fewer spare-part changes
- 04
Touch-screen automatic control with real-time pressure, temperature and flow monitoring, plus data recording and traceability
- 05
Configurable to your material and capacity for emulsions, liposomes, cell disruption and nanomaterials
Typical materials.
- Single-wall carbon nanotubes
- Graphene
- Biopharmaceuticals
- Food
- Chemicals
- Emulsions
- Liposomes
- Cell disruption
- Nanomaterials
Frequently asked questions
Which materials can the Industrial High-Pressure Homogenizer Series process?
The Industrial High-Pressure Homogenizer Series is used for single-wall carbon nanotubes, graphene, biopharmaceuticals, food, chemicals, emulsions, liposomes and cell disruption. Whether it suits a new material depends on solids content, viscosity, hardness and whether the slurry is water- or solvent-based; send the material data sheet and target particle size and INFOR's engineers will assess it.
Which model of the Industrial High-Pressure Homogenizer Series should I choose?
The series has 10 models (WH22-100, WH22-150, WH37-150, WH37-100, WH75-30 PLUS, WH75-35, WH75-40, WH110-40 PLUS, WH110-42, WH132-45) with motor power of 18.5-132 kW. All share the same grinding principle and fineness range, so the model is chosen by required throughput: the recipe is proven on the smallest chamber, then the production size is calculated from the validated flow rate.
What are the main design features of the Industrial High-Pressure Homogenizer Series?
Main design features of the Industrial High-Pressure Homogenizer Series: Reinforced industrial drive for 1000-1500 bar on high-viscosity, hard, fibrous or fine-particle materials; Built for continuous 24/7 operation, from a few hundred to several thousand litres per hour; Homogenizing chamber and valve parts in hardened alloys and ceramics for longer service life and fewer spare-part changes; Touch-screen automatic control with real-time pressure, temperature and flow monitoring, plus data recording and traceability.
Get a quotation.
Tell us the material, target D50/D90 and hourly output. We reply within 24 hours with a model recommendation.
Test Your Material