Pilot High-Pressure Homogenizer Series
Pilot-scale high-pressure homogenizers from 20 to 300 L/h, bridging laboratory trials and volume production.
- Flow
- 20-300
L/ h - Max. working pressure
- up
to 1500 bar - Motor
- 5.5-11
kW - Product viscosity
- <2000
cP - Feed particle size
- <500
µm
Built for pilot-stage homogenizing, the WH-PILOT runs on a 5.5 kW drive, handles high-viscosity materials and particle-laden systems, and covers 20-40 L/h at up to 1500 bar. The wider series extends to 300 L/h for process scale-up ahead of full production.
5 models.
Figures from the current product catalogue. Final configuration depends on your material and process.
| Model | WH-PILOT | WH-PILOT16 | WH-PILOT22 | WH12-150 | WH12-300 |
|---|---|---|---|---|---|
| Flow Rate (L/h) | 20-40 | 50-60 | 100 | 100-150 | 200-300 |
| Max. Working Pressure (bar) | 1500 | 1000 | 600 | 1500 | 1000 |
| Motor Power (kW) | 5.5 | 5.5 | 5.5 | 11 | 11 |
| Weight (kg) | 240 | 240 | 240 | , | , |
| Dimensions (mm) | 840×635×920 | 840×635×920 | 840×635×920 | , | , |
What is built in.
- 01
Combines laboratory flexibility with production reliability, lowering the risk and time of scale-up
- 02
High-power drive handles high-viscosity, hard and fine-particle materials for stable homogenizing
- 03
7-inch colour touch screen for real-time setting and monitoring of pressure and flow
- 04
316 or higher-grade stainless steel, with wear- and corrosion-resistant materials at key parts for long continuous runs
- 05
Overpressure protection, temperature monitoring and automatic pressure relief
Typical materials.
- Single-wall carbon nanotubes
- Graphene
- Biopharmaceuticals
- Food processing
- Cosmetics
- New materials
- Dispersion and emulsification
- Cell disruption
Frequently asked questions
Which materials can the Pilot High-Pressure Homogenizer Series process?
The Pilot High-Pressure Homogenizer Series is used for single-wall carbon nanotubes, graphene, biopharmaceuticals, food processing, cosmetics, new materials, dispersion and emulsification and cell disruption. Whether it suits a new material depends on solids content, viscosity, hardness and whether the slurry is water- or solvent-based; send the material data sheet and target particle size and INFOR's engineers will assess it.
Which model of the Pilot High-Pressure Homogenizer Series should I choose?
The series has 5 models (WH-PILOT, WH-PILOT16, WH-PILOT22, WH12-150, WH12-300) with motor power of 5.5-11 kW. All share the same grinding principle and fineness range, so the model is chosen by required throughput: the recipe is proven on the smallest chamber, then the production size is calculated from the validated flow rate.
What are the main design features of the Pilot High-Pressure Homogenizer Series?
Main design features of the Pilot High-Pressure Homogenizer Series: Combines laboratory flexibility with production reliability, lowering the risk and time of scale-up; High-power drive handles high-viscosity, hard and fine-particle materials for stable homogenizing; 7-inch colour touch screen for real-time setting and monitoring of pressure and flow; 316 or higher-grade stainless steel, with wear- and corrosion-resistant materials at key parts for long continuous runs.
Get a quotation.
Tell us the material, target D50/D90 and hourly output. We reply within 24 hours with a model recommendation.
Test Your Material