Laboratory High-Pressure Homogenizer Series
Bench-top high-pressure homogenizers with up to 2000 bar design pressure, for nano dispersion, emulsification and cell disruption from 20 ml samples.
- Design pressure
- up
to 2000 bar - Working pressure
- 0-1500
bar - Minimum sample
- 20-40
ml - Feed particle size
- <500
µm - Feed temperature
- <90
°C
Built for research laboratories and small-batch work, the laboratory series uses a reciprocating plunger to push material through an adjustable homogenizing valve under strong compression. Cavitation, impact and shear break up agglomerates and disperse the material evenly, from minimum sample volumes of 20-40 ml.
4 models.
Figures from the current product catalogue. Final configuration depends on your material and process.
| Model | WH-NANO | WH-1500 | WH-BASIC | BASIC 30 |
|---|---|---|---|---|
| Design Pressure (bar) | 2000 | 2000 | 1500 | 2000 |
| Working Pressure (bar) | 0-1500 | 0-1500 | 0-1500 | 0-1000 |
| Min. Processing Volume (ml) | 20 | 40 | 25 | 40 |
| Inline Flow (L/h) | 5-10 | 5-15 | 10 | 30 |
| Feed Particle Size (µm) | <500 | <500 | <500 | <500 |
| Feed Temperature (°C) | <90 | <90 | <90 | <90 |
| Weight (kg) | 128 | 130 | 130 | 168 |
| Dimensions (mm) | 720×450×475 | 700×450×475 | 700×450×475 | 840×525×480 |
What is built in.
- 01
High working pressure for nano-scale particle breakage, homogenization and emulsification with a uniform size distribution
- 02
Small minimum sample volume saves scarce or costly research material
- 03
7-inch colour touch screen for real-time setting and monitoring of pressure and flow
- 04
Modular design with interchangeable homogenizing chambers for emulsions, liposomes, cell disruption and nano suspensions
- 05
Overpressure protection, temperature monitoring and automatic pressure relief, with 316 or higher-grade stainless steel
Typical materials.
- Single-wall carbon nanotubes
- Graphene
- Materials science
- New energy
- Chemical engineering
- Synthetic biology
- Cosmetics
- Food and beverage
Frequently asked questions
Which materials can the Laboratory High-Pressure Homogenizer Series process?
The Laboratory High-Pressure Homogenizer Series is used for single-wall carbon nanotubes, graphene, materials science, new energy, chemical engineering, synthetic biology, cosmetics and food and beverage. Whether it suits a new material depends on solids content, viscosity, hardness and whether the slurry is water- or solvent-based; send the material data sheet and target particle size and INFOR's engineers will assess it.
Which model of the Laboratory High-Pressure Homogenizer Series should I choose?
The Laboratory High-Pressure Homogenizer Series is supplied as a single configuration, so selection means confirming it matches your material, target particle size and hourly output, which INFOR verifies on laboratory or pilot equipment before the machine is confirmed.
What are the main design features of the Laboratory High-Pressure Homogenizer Series?
Main design features of the Laboratory High-Pressure Homogenizer Series: High working pressure for nano-scale particle breakage, homogenization and emulsification with a uniform size distribution; Small minimum sample volume saves scarce or costly research material; 7-inch colour touch screen for real-time setting and monitoring of pressure and flow; Modular design with interchangeable homogenizing chambers for emulsions, liposomes, cell disruption and nano suspensions.
Get a quotation.
Tell us the material, target D50/D90 and hourly output. We reply within 24 hours with a model recommendation.
Test Your Material