Заметки из цеха измельчения.
Руководства по выбору мельниц, технологический опыт и новости компании.
Carbon Nanotube Dispersion with a Bead Mill: Process, Settings and Quality Checks
How to disperse carbon nanotubes with a bead mill: pre-dispersion, bead and speed settings, avoiding tube damage, and how to check CNT conductive paste quality.
Читать статьюHow to Choose the Right Bead Size for a Bead Mill (With a Practical Size Chart)
How bead size affects grinding results, with a bead size chart, bead materials, filling ratio and separation tips for wet and nano grinding.
What Determines Bead Mill Throughput? 8 Factors That Set Capacity
Bead mill throughput depends on chamber size, power, target fineness, feed quality, viscosity, beads, separation and cooling. How each factor sets capacity.
Bead Mill Separation Systems: Screen, Gap or Screen-Free Centrifugal
How bead mill separation works: static screens, dynamic gap and rotating screens, and screen-free centrifugal separators, with how to choose for fine beads.
Bead Mill Screen Clogging: Causes, Prevention and Cleaning
Why bead mill screens clog: broken or undersized beads, viscosity rise, high flow, oversize feed and heat. How to prevent clogging, clean screens or avoid them.
How to Calculate Grinding Bead Filling in a Bead Mill (With Example)
Bead charge = chamber volume × filling ratio × bead bulk density. A worked example with zirconia beads, how to choose the ratio, and when to top up.
Zirconia Beads vs Glass Beads: How to Choose Grinding Media for a Bead Mill
Zirconia vs glass grinding beads: density, wear, contamination and cost compared, plus how to choose bead size and material for your bead mill.
Bead Mill Rotor Types Compared: Disc, Disc-Pin, Pin-Rod and Turbine
Disc, disc-pin, pin-rod and turbine bead mill rotors compared: grinding energy, flow, heat and best applications, with INFOR models for each.
Dry Grinding vs Wet Grinding: Differences and How to Choose
Dry vs wet grinding compared: achievable fineness, process steps, energy, contamination and safety, and when a dry bead mill makes more sense.
Sedimentation in Horizontal Bead Mills: Causes and Solutions
Why beads and particles settle in horizontal bead mills, the problems it causes at restart, and how to prevent it with flushing, start-up steps and design.
Bead Mill Glossary: 30 Wet Grinding Terms Explained
Bead mill and wet grinding terms explained: filling ratio, separation, specific energy, stress energy, residence time, D50 and D90, agglomerates and more.
Bead Mills for Pigments and Color Paste: Equipment and Process Guide
How bead mills grind organic and inorganic pigments and color paste: color strength, gloss, viscosity and heat control, and which INFOR mills to use.
Bead Mills for Printing Inks and Inkjet Inks: Equipment Guide
Bead mills for offset, gravure, flexo and inkjet inks: fineness, oversize control, heat and viscosity, and which INFOR mills suit each ink type.
Bead Mills for MLCC and Electronic Ceramics: Dispersion and Grinding
Bead mills for MLCC barium titanate slurry and electronic ceramics: sub-micron dispersion, contamination control and narrow PSD, with INFOR equipment.
Bead Mills for Agrochemical Suspension Concentrates (SC)
Wet bead milling of pesticide suspension concentrates: particle size for stability and efficacy, heat control, throughput, and suitable INFOR bead mills.
Bead Mills for Pharmaceutical Nanosuspensions and API Wet Milling
Wet bead milling of poorly soluble APIs into nanosuspensions: small batches, contamination, temperature and cleaning, and suitable INFOR lab and pilot mills.
Bead Mills for Cosmetics and Personal Care Products
Bead mills for cosmetics: mineral sunscreen dispersions, color cosmetics pigments, nail polish and toothpaste, with hygiene and fineness needs and INFOR mills.
Prof. Xiao Yao of Wenzhou University to Give Keynote on Sodium-Ion Layered Oxide Cathodes
Prof. Xiao Yao of Wenzhou University will speak on adaptive layered oxide cathodes for sodium-ion batteries at INFOR's 2026 forum in Gucheng, Hubei, on November 16-17.
Prof. Liu Xingquan of UESTC to Speak on PEO-Based Solid Electrolytes at INFOR's 2026 Forum
Prof. Liu Xingquan of UESTC will present his research on PEO-based ceramic composite solid electrolytes and solid-state batteries at INFOR's 2026 forum in Gucheng, Hubei.
How to Choose a Bead Mill Manufacturer in China: A 9-Point Checklist
A 9-point checklist for choosing a bead mill manufacturer in China: material tests, scale, contamination control, line engineering, references and service.
Bead Mill Price: What Determines the Cost of a Sand Mill
What sets the price of a bead mill (sand mill): machine class, chamber size, contact materials, drive, explosion protection, automation and line scope.
LFP Cathode Material Plant: Complete Equipment List by Process Step
Equipment for an LFP cathode plant by process step: dosing, mixing, homogenising, grinding, iron removal, spray drying, sintering, milling, sieving, packing.
Full Agenda & Travel Guide: 2026 New Energy Materials Forum & INFOR Hubei Park Opening
The full two-day agenda, venues and travel options for the 2026 New Energy and New Materials Industry Development Forum and the opening of INFOR's new Hubei industrial park in Gucheng, Xiangyang, on November 16-17.
Keynote Speaker: Zeng Zi of E-One Moli Energy (Molicel) Confirmed for INFOR's 2026 Forum
Zeng Zi, Vice President of E-One Moli Energy (Molicel), will speak on the market outlook for high-performance batteries in emerging sectors at INFOR's 2026 forum and Hubei park opening in Gucheng.
Invitation: Meet INFOR at the 4th European Battery Summit 2026 in Barcelona, Booth T4
INFOR will exhibit at Booth T4 at the 4th European Battery Summit, Hilton Barcelona, November 2-3, 2026, presenting intelligent grinding equipment and complete-line process solutions for battery materials.
INFOR Wins Two Bead Mill System Contracts for New Materials Projects
INFOR has won a batching and bead mill system tender from an SOE-backed industry leader and a grinding and drying line for a listed circular-economy company.
INFOR Showcases Vertical Bead Mills at the 20th China Renewable Energy Conference
INFOR showcased vertical bead mills and wet grinding solutions for LFP, silicon-carbon, CNT dispersion and solid-state battery materials at the 20th China Renewable Energy Conference.
INFOR at The Battery Show India 2026: Bead Mills and Wet Grinding Lines for Battery Materials
INFOR bead mills, laboratory trials and wet grinding lines for LFP, LMFP and CNT conductive paste at The Battery Show India 2026, October 22-24, Greater Noida.
CENOTEC & INFOR Global Grinding Technology Center (G-GTC) Officially Opens
CENOTEC and INFOR launched the Global Grinding Technology Center (G-GTC) in Korea, combining bead mills, zirconia beads and process know-how for battery materials.
Driven by Passion: A 23-Year-Old Leading INFOR's Middle East Market
Meet Bree, the 23-year-old who heads INFOR's Middle East sales, and the team culture that lets young people take on overseas markets.
Prof. Wang Zhenbo of HIT to Speak on Sodium-Ion Batteries at INFOR's 2026 Forum
Prof. Wang Zhenbo of HIT will deliver a keynote on progress and opportunities in sodium-ion battery technology at INFOR's 2026 forum in Gucheng, Hubei, on November 16-17.
A Light On Every Sunday: The Self-Drive of a Young INFOR Team Member
Meet Xiao Yu, a 24-year-old order coordination assistant at INFOR whose initiative and care reflect the team spirit behind every bead mill we deliver.
INFOR at The Battery Show North America 2026 in Detroit
At booth 6341 in Detroit, INFOR presented LPM vertical nano ceramic bead mills and wet grinding line solutions, backed by local service capability in North America.
30-Day Countdown: INFOR Hubei Industrial Park Opening and New Energy Materials Forum
On 16-17 November 2026, INFOR opens its new Hubei industrial park in Gucheng, Xiangyang, alongside the 2026 New Energy and New Materials Industry Development Forum.
INFOR at the 2026 SMM Lithium Battery Raw Materials Conference in Chengdu
At booth A20 in Chengdu, INFOR discussed high-compaction LFP, silicon-carbon anodes and solid-state slurries, showing how bead mills turn raw materials into stable yield.
INFOR at the Changzhou Carbon Materials and Silicon-Carbon/Porous Carbon Forum
In Changzhou, INFOR addressed dispersion challenges in silicon-carbon, porous carbon, hard carbon and CNT materials, presenting bead mill solutions that scale without failure.
INFOR at the 5th Iron Phosphate and LFP Industry Chain Summit in Changsha
At booth A5 in Changsha, INFOR discussed higher compaction density, lower energy use and batch consistency in LFP production with material makers, cell producers and researchers.
What China's Golden Week Taught Us About Buying the Right Bead Mill
This year's National Day holiday showed people skipping hype for real value. Choosing a bead mill works the same way: fit your material, process and line, not a price sheet.
Seeing the Market Up Close: An INFOR Sales Lead's Notes from Dubai and Oman
INFOR's Middle East market lead Bree Zeng reflects on the Middle East Coatings Show in Dubai and field visits in Oman, and on what it takes to build trust overseas.
From Dubai to Oman: A New Look at Chinese Manufacturing Going Global
INFOR's Africa market lead Carlos Yan shares field notes from the Middle East Coatings Show in Dubai and a new energy materials project site in Sohar, Oman.
Prof. Ma Zifeng of SJTU to Speak on Hydrogen-Electric Hybrid Power at INFOR's 2026 Forum
Prof. Ma Zifeng, twice chief scientist of China's 973 Program, will speak on hydrogen-electric hybrid power and integrated energy systems at the 2026 New Energy and New Materials Forum and INFOR Hubei Industrial Park Opening.
Invitation: Meet INFOR at The Battery Show India 2026, Booth 510, New Delhi
INFOR will exhibit intelligent grinding equipment and complete line solutions for battery materials at The Battery Show India, 22-24 October 2026, India Expo Centre, New Delhi, Booth 510.
October 2026 Events in China: Meet INFOR at Four New Energy Materials Conferences
In October INFOR exhibits LPM vertical nano ceramic bead mills and grinding solutions at four conferences in China: the LFP summit in Changsha, the carbon materials forum in Changzhou, the SMM annual conference in Chengdu and the China Renewable Energy Conference in Shaoxing.
Invitation: Meet INFOR at The Battery Show North America 2026, Booth 6341, Detroit
US-China high-level engagement and North America's storage boom are reshaping the battery market. INFOR invites you to Booth 6341 at The Battery Show North America, 12-15 October 2026, Huntington Place, Detroit.
INFOR at the 2026 China Manganese-Based Materials and Battery Industry Innovation Summit in Harbin
As special sponsor of the Harbin summit, INFOR presented bead mill processes for LMFP, lithium-rich manganese, LMO and LNMO materials and discussed particle size control, dispersion and scale-up with material makers and researchers.
Prof. Li Fengting of Tongji University to Speak on Africa's New Energy Market at INFOR's 2026 Forum
Prof. Li Fengting, Fellow of the African Academy of Sciences, will speak on Africa's new energy market evolution, resources and opportunities at the 2026 New Energy and New Materials Forum and INFOR Hubei Industrial Park Opening.
Prof. Tang Yougen of Central South University to Speak on Sodium Solid-State Batteries at INFOR's 2026 Forum
Prof. Tang Yougen, President of the Hunan Battery Industry Association, will speak on R&D and pathways for sodium solid-state batteries at the 2026 New Energy and New Materials Forum and INFOR Hubei Industrial Park Opening.
Laboratory Sand Mill Scale-Up Guide: From R&D Testing to Industrial Production
Successful sand mill scale-up is not achieved by simply increasing chamber volume. The production mill must reproduce the grinding conditions that delivered the required particle size in laboratory te...
Vertical vs Horizontal Bead Mill (Sand Mill): Key Differences in Design, Performance and Applications
Vertical and horizontal sand mills use the same basic principle, high-speed agitation of grinding media to disperse and reduce particles in a liquid slurry, but their chamber orientation affects media...
How to Choose a Bead Mill (Sand Mill) for Wet Grinding: Step-by-Step Guide
Step-by-step bead mill selection: target fineness, bead size, vertical or horizontal, rotor, throughput, chamber lining, cooling and seals, then a lab trial.
Overseas Markets: India, After the BRICS Summit, a Window Opens for Intelligent Equipment Exports
India's young population, local manufacturing push and supply gaps in battery materials and front-end equipment, plus easier business visas and restored direct flights, and why success means building production line capability, not just selling machines.
Overseas Markets: Africa, From Demographic Dividend to Industrial Transformation, How Chinese Grinding Equipment Can Get Ahead
Africa's young population, steady growth and rising FDI are opening a window for Chinese high-end grinding equipment in battery materials, coatings and inks, and mineral processing.
Invitation: 2026 China Manganese-Based Materials and Battery Industry Innovation Summit, Harbin, 20-22 September
INFOR is a special sponsor of the 2026 China Manganese-Based Materials and Battery Industry Summit at Harbin Institute of Technology and will present its bead mill processes for manganese-based materials.
Prof. Cao Yuliang of Wuhan University to Speak at 2026 New Energy Materials Forum and INFOR Hubei Industrial Park Opening
Prof. Cao Yuliang, who took polyanion sodium-ion cathodes from the lab to 10,000-tonne production, will speak on progress and challenges of phosphate-based polyanion sodium-ion batteries on 16-17 November in Gucheng, Hubei.
Overseas Markets: Morocco, North Africa's Battery Dark Horse and a Phosphate-Based Materials Hub for Europe
With more than two-thirds of global phosphate reserves, proximity to Europe and over 50 free trade agreements, Morocco is becoming the core base for LFP cathode materials supplying Europe. Fundamentals, business culture and key players.
INFOR at CLNB 2026 Asia Battery Materials Cooperation Forum in Seoul, Signs Strategic Agreement with SMM
As a sponsor of CLNB 2026 in Seoul, INFOR showcased its bead mills and local production line applications in Korea and signed an overseas market strategic cooperation agreement with Shanghai Metals Market.
Prof. Hu Guorong of Central South University to Give Keynote at 2026 New Energy Materials Forum and INFOR Hubei Industrial Park Opening
Prof. Hu Guorong will speak on LFP material technology and industry competition at the 2026 New Energy and New Materials Industry Development Forum and the opening of INFOR's new Hubei industrial park on 16-17 November in Gucheng, Xiangyang.
INFOR Joins Dongguan Battery Industry Association as Vice President Member
On 31 August 2026 the Dongguan Battery Industry Association visited INFOR's Songshan Lake headquarters and awarded INFOR the plaque of vice president member unit.
INFOR выпускает новое поколение нанобисерных мельниц
Представляем новую линейку нанобисерных мельниц, спроектированных для более тонкого размера частиц, более высокой производительности и меньшего энергопотребления.
INFOR Signs Strategic Agreement with National China-Latin America Trading Platform
INFOR signed a strategic cooperation agreement with the China-Latin America and Caribbean Countries Trading Platform, including an exclusive agreement for bead mill products, to expand into Latin American markets.
INFOR at Asia Pacific Coatings Show 2026 in Jakarta
INFOR exhibited complete coatings grinding solutions at APCS 2026 in Jakarta, meeting customers from Indonesia, Malaysia and Vietnam and reaching preliminary agreements with several new customers.
Overseas Markets: UAE, How to Win the Middle East's Lighthouse New Energy Market
The UAE is home to the world's largest solar-plus-storage project and is the crown jewel for overseas storage suppliers. Geography, people, economy, industry logic, business culture, key players and INFOR's projects there.
Overseas Markets: Oman, Why It Is Becoming the Middle East's New Energy Storage Hub
Oman's strategic location, free zones and low power prices are making it a hub for battery materials and storage in the Middle East. An eight-part analysis plus INFOR's 60,000-tonne LFP project in Oman.
Lithium Battery and New Energy Weekly Report
Record August battery production schedules, a looming consumption tax, strong half-year results, faster solid-state industrialization and lithium carbonate back at RMB 150,000 per tonne.
Overseas Markets: Indonesia, Resources, Capacity Boom and How to Take Root in a Young Market
A complete look at Indonesia for new energy equipment suppliers: geography, a young population of 284 million, nickel-driven downstream policy, business culture, and INFOR's 100,000-tonne LFP project.
Overseas Markets: United States, A Huge Opportunity Amid Policy Storms and How to Find Your Place
The US market for battery and storage equipment: geography, demographics, IRA-driven reshoring, a rules-first business culture, key players, policy risks and INFOR's equipment already shipped to the US.
Overseas Markets: South Korea, How to Win Benchmark Projects in a Mature, Chaebol-Led New Energy Market
Korea is INFOR's most successful overseas market. Geography, chaebol-led industry, business culture, rigorous validation, the LGES/Samsung SDI/SK On ecosystem and Korea's first 60,000-tonne LFP project equipped entirely with INFOR bead mills.
Nano Grinding Machine Selection Guide for Battery Slurry, Coatings and Ceramic Materials
Selecting the right nano grinding machine starts with the material, not the mill size. Battery slurry usually prioritizes contamination control, temperature stability and nano-scale dispersion...
Nano Grinding vs Micron Grinding: Which Particle Size Is Right for Your Material?
Choose micron grinding when the required product performance can be achieved at micrometer-scale particle sizes and production cost, throughput, and process simplicity are priorities. Choose nano...
INFOR представляет прецизионное измельчение на Battery Expo 2026
Встретьтесь с нашей командой и посмотрите живые демонстрации диспергирования электродной суспензии и углеродных нанотрубок на крупнейшем в этом году событии по аккумуляторным технологиям.
Overseas Energy Storage Booms: Three Main Markets Behind 200 GWh of Installations
Overseas markets have overtaken China as the main engine of storage growth, with nearly 200 GWh expected in 2026. North America, Europe and the Middle East compared, plus C&I storage, competition, prices and the 2027 outlook.
US-China Trade Clash Escalates: Are There Still Opportunities in the US Market?
The latest US tariffs and UFLPA entity list additions, China's countermeasures, and a practical view of how Chinese manufacturers can still take part in North American demand.
2nd High-Compaction LFP and Upstream Raw Materials Summit 2026: INFOR Presents Bead Mill Advances
As a core sponsor of the 2nd High-Compaction LFP Summit in Changsha, INFOR presented its vertical bead mill's performance in high-compaction LFP; INFOR has equipped LFP lines totalling over 1 million tonnes a year.
The Middle East Bead Mill Market: Prospects, Risks and How to Win
Why the Middle East is a quality second growth curve for Chinese bead mills, new energy capacity, import dependence and diverse applications, plus four key risks and practical advice.
Middle East New Energy Weekly: Building Full Supply Chains, a Golden Three Years for Chinese Equipment
The Middle East is moving from buying finished products to building complete new energy supply chains. Updates from the UAE, Saudi Arabia, Oman, Kuwait and Bahrain, and where equipment makers should focus.
Two Major Policies Push China's New Energy Industry into a Deep Reshuffle
A new consumption tax on lithium batteries and China's 15th Five-Year renewable energy plan are reshaping batteries, storage, EVs, solar and equipment exports.
The Middle East's Industrial Landscape and the Future of Its New Energy Sector
An overview of the Middle East's oil-based economies and diversification, the latest regional conflicts and their impact on energy routes, the push into new energy, and recent Chinese projects in Oman, the UAE, Kuwait and Egypt.
INFOR Visits Songshan Lake Materials Laboratory to Deepen Research Cooperation
INFOR's management and technical team visited the Songshan Lake Materials Laboratory and agreed joint research projects, combining the lab's frontier research with INFOR's in-house materials testing centre.
WAIC 2026 Sold Out: Behind the AI Boom, Energy Storage Is the Real Foundation
The 2026 World Artificial Intelligence Conference shows AI moving into industrial use, and why AI's power demand makes renewables and storage essential, with five implications for battery material grinding equipment.
Vietnam's Motorbike Ban Takes Effect: A Golden Period for Southeast Asian Batteries
Hanoi has begun phasing out petrol motorbikes. The shift to LFP-powered e-motorbikes is driving a wave of Chinese battery and material plants in Vietnam, and steady demand for bead mills.
98% by 2030: Why Chinese Companies Will Dominate Global LFP
A forecast puts China's share of global LFP cathode supply at 98% by 2030. The reasons: LFP's advantages, Chinese process and equipment depth, overseas plants built with Chinese technology, and structural barriers.
World's First LPM-2000L Vertical Bead Mill Ships from INFOR
INFOR has shipped the world's first 2,000 L vertical bead mill, the LPM-2000L, for months of on-site validation, its third first-of-a-kind machine after the LPM-400L and LPM-1000L.
INFOR Hosts Closed-Door Meeting on Taking Coatings Businesses to Bangladesh
INFOR hosted dozens of coatings and ink business leaders at its Songshan Lake headquarters to share practical experience on entering Bangladesh and present its global service network.
Invitation: Closed-Door Meeting on Taking Coatings and Ink Businesses to Bangladesh
INFOR invites coatings and ink business leaders to a closed-door meeting at its Songshan Lake headquarters on 4 July on market opportunities, pitfalls and complete-plant solutions in Bangladesh.
RMB 25 Trillion: China's 15th Five-Year New Energy Window, Storage, Going Global and a New Landscape
What China's 15th Five-Year plan for a new energy system means: RMB 25 trillion of investment, energy storage as the fastest-growing segment, capacity moving overseas and a reshaped global supply chain.
4th China International Sodium-Ion Battery Forum: INFOR Signs New Large-Line Agreement
At the 4th China International Sodium-Ion Battery Technology and Market Forum, INFOR presented its sodium-ion line solutions and signed a new large-line equipment agreement with a leading sodium-ion company.
Indonesia's Nickel Winter: Why Chinese Companies Hold On Despite Losses
Production cuts, policy pressure on costs, cash flow and permits, why Chinese nickel producers in Indonesia are holding on, the outlook to 2030 and what it means for grinding equipment suppliers.
INFOR Hubei Runs Vertical and Horizontal Bead Mill Lines at Full Capacity
INFOR's Hubei plant is building dozens of vertical and horizontal bead mills in parallel for repeat orders from battery and coatings customers, with strict testing and dedicated commissioning support.
Will Brazil Become the Next Indonesia for Chinese Investment?
Why Chinese battery companies are investing in Brazil, resources, market, MERCOSUR access and policy, which companies are already there, why it is a growth market for bead mills, and the risks.
Vietnam Coatings Expo 2026: INFOR Secures Distribution and Complete-Line Interest
At the 2026 Vietnam International Coatings Expo in Ho Chi Minh City, INFOR presented its full range of coatings grinding equipment and line solutions and agreed several distribution and equipment cooperation intentions.
The Battery Show Europe 2026: INFOR Presents High-End Grinding and Sulfide Electrolyte Solutions
At The Battery Show Europe 2026 in Stuttgart, INFOR showed its high-end vertical bead mill and a complete sulfide solid electrolyte solution and reached preliminary agreements with overseas customers.
From Morocco to Oman: Why Chinese Investors Are Shifting to the Gulf
Why Chinese manufacturers are increasingly choosing Oman over Morocco: geography, tax and ownership rules, resources, bilateral cooperation, and why Morocco still has a role.
INFOR Wins Dozens of 1,000 L Vertical Bead Mills for a Multi-100,000-Tonne LFP Project
INFOR has won the bead mill package for a leading state-owned materials company's LFP project in Yunnan, its third cooperation with the customer, with dozens of 1,000 L vertical bead mills.
INFOR's June 2026 Overseas Exhibitions: Morocco, Indonesia, Germany and Vietnam
In June 2026 INFOR attends the Africa Lithium Battery Summit in Marrakech, the Indonesia Mining & Critical Metals Conference, The Battery Show Europe in Stuttgart (booth 4-B45) and the Vietnam Coatings Expo (booth C63).
China-Russia Summit Sets a New Blueprint for Economic Cooperation
An overview of the May 2026 China-Russia summit agreements on politics, trade, infrastructure, energy, technology and global governance, and INFOR's plans for the Russian market.
What the US-China Leaders' Meeting Means for the New Energy Industry
An analysis of the May 2026 US-China state visit and its implications for new energy vehicles, trade and lithium battery equipment, and how INFOR is positioning its overseas strategy.
How Vertical Bead Mills Are Meeting the Demands of Modern Material Processing
Walk through any advanced manufacturing facility today, and you will hear the same conversation: how do we make particles smaller, more uniform, and do it without burning through our energy budget? Wh...
CIBF 2026: INFOR's New-Material Solutions Win Recognition at Home and Abroad
At CIBF 2026 in Shenzhen, INFOR presented large vertical and horizontal LFP lines, a solid electrolyte line and carbon material solutions, receiving more than 200 customers from around the world.
Opportunities for Chinese Manufacturing in the New Energy Wave
Surging EV and storage demand is driving a wave of new material lines. INFOR's Hubei and Dongguan plants are running at full capacity, with a new Hubei plant due in August and an expanding global network.
The Nano Grinding Bottleneck: Why Silicon-Carbon Anode Manufacturers Are Switching to Dual-Power Sand Mills
The Nano Grinding Bottleneck: Why Silicon-Carbon Anode Manufacturers Are Switching to Dual-Power Sand MillsEvery battery engineer knows the frustration. You have a promising silicon-carbon anode formu...
INFOR Hosts Carbon Materials Technology Salon at Songshan Lake Headquarters
INFOR hosted a carbon materials technology salon with more than 50 experts and company representatives, presenting its SWCNT and MWCNT powder and slurry equipment.
INFOR Wins Solid-State Battery Equipment Innovation Pioneer Award at GGII Summit
At the 2026 GGII Solid-State Battery Technology and Application Summit in Hangzhou, INFOR presented its complete solid electrolyte grinding system and won the Solid-State Battery Equipment Technology Innovation Pioneer Award.
Dongguan Industry Bureau, Dongguan Daily and Tsinghua Institute Visit INFOR
Officials from the Dongguan Municipal Bureau of Industry and Information Technology, Dongguan Daily and the Tsinghua research institute visited INFOR's Songshan Lake headquarters to learn about its development and needs.
Customer Commends INFOR for 10,000-Tonne Conductive Agent Project
A customer sent INFOR a letter of commendation after its 10,000-tonne conductive agent line was installed, commissioned and brought into production at the first attempt in about two months.
Vietnam's Manufacturing Rise: A Golden Window for Chinese Equipment
Vietnam's electronics, battery, coatings and solar industries need high-end bead mills it cannot make locally; why Chinese bead mills have the advantage and how INFOR serves Vietnamese customers.
Visit INFOR at CIBF 2026, Shenzhen, Booth 10T113
INFOR will show its high-end vertical bead mill, a complete solid electrolyte process solution and grinding equipment for carbon materials at CIBF 2026, 13-15 May, booth 10T113.
Invitation: CLNB 2026 New Energy Industry Expo, Suzhou, Booths F174-F177
INFOR invites you to CLNB 2026 in Suzhou, 8-10 April, where it will show a model of a multi-10,000-tonne LFP vertical bead mill line and its latest grinding equipment.
Soaring Oil Prices Accelerate Global New Energy Development
News of the sharp oil price surge has trended widely over the past few days, drawing wide attention, especially for those of us in the new energy industry, as it directly shapes the direction of the...
The Overseas Market for Lithium-Ion New Energy: Development and Prospects
In recent years, China’s lithium-ion new energy industry has achieved leapfrog development, from catching up to taking the lead globally. Covering upstream mineral resource extraction, midstream cell...
InterBattery 2026: INFOR's Vertical Bead Mill a Highlight in Seoul
At InterBattery 2026 in Seoul, INFOR showed its vertical, dry and AI bead mills and SWCNT equipment, and agreed a joint laboratory with a Korean partner.
TBSA Asia 2026, Hong Kong: INFOR Wins 2025 Lithium Battery Equipment Innovation Award
At TBSA Asia 2026 in Hong Kong, INFOR's vertical bead mill drew more than 100 key customer enquiries, and INFOR received OFweek's 2025 Lithium Battery Equipment Innovation Technology Award.
INFOR at Interlakokraska 2026, Moscow
INFOR presented its latest grinding technology for the coatings industry at Interlakokraska 2026 in Moscow and discussed cooperation with Russian and international companies.
INFOR 2025 Annual Gala: Building Dreams Together
INFOR held its 2025 annual meeting and 2026 New Year gala in Dongguan with colleagues from India and customers from Korea and the US, reviewing 2025 and setting goals for 2026.
Good News | Infor Wins the Bid for 10,000-Ton Sodium Battery Cathode Material Project, Leading the New Industrial Track
At the start of the new year, the new energy sector remains booming. Driven by the rapid development of the lithium battery industry chain, sodium-ion batteries, as a highly potential alternative tech...
8 Most Anticipated Highlights of China's Battery Industry in 2026
2025 was a pivotal year for China's battery industry to emerge from in-depth restructuring and achieve a strategic turning point, led by the explosive growth of energy storage.
India's Lithium Battery Companies and Project Progress
An update on India's battery market: government targets and PLI policy, local players such as Agratas, Himadri, Amara Raja and Nash Energy, Chinese partnerships and orders, and the challenges ahead.
INFOR's 2026 International Exhibition Programme
After nearly ten overseas shows in 2025, INFOR has confirmed more than ten international exhibitions and summits for 2026 across Asia, Europe, Africa and North America.
India's Industrial Structure and the Development of Its New Energy Industry
An analysis of India's services-led economy, its lagging manufacturing, and the policy-driven but import-dependent lithium battery industry, opportunities, Chinese involvement and challenges.
India's Major Business Conglomerates
An overview of India's six largest business groups, Reliance, Adani, Tata, Bharti, JSW and Aditya Birla, their families, core businesses and influence.
India's Regions and Major Cities
A quick guide to India's administrative divisions and ten major cities for new energy companies considering investment in India.
Bead Mill vs Ball Mill for Nano Grinding: Which to Choose
For sub-micron and nano wet grinding choose a bead mill; for dry or coarse grinding and large batches above tens of microns, a ball mill. Comparison table.
Infor's Vertical Dual-Power Product Ships, A New Powerful Tool For High-End Material Grinding Debuts!
Recently, the Infor vertical dual-power product has officially been shipped! In the field of industrial grinding, sand mills play a key role. Today, let's take a good look at the differences betwe...
Single-Walled Carbon Nanotubes: The Journey Of A “Super Material” From The Laboratory To Industry
In the dazzling constellation of contemporary materials science, single-walled carbon nanotubes (SWCNTs) undoubtedly stand out as a prominent star. Formed by the perfect rolling of a single layer of ...
Dong Mingzhu and Gree Titanium: Refusing to Accept Defeat
How Gree Titanium's lithium titanate technology, once doubted, won a China Patent Gold Award, and what its story says about persistence in Chinese manufacturing.
Explosive Growth of the Energy Storage Market: Upstream Raw Materials Face Shortage Signals
Recently, the energy storage market has witnessed explosive growth, driven by the formation of clear profit models and surging overseas demand. This growth is transmitting tight signals to the upstrea...
Solid-State Battery Race Heats Up: Over 75 Global Enterprises Layout, Industrialization Accelerates in 2025
As the global energy transition advances and the electric vehicle industry moves toward higher performance and greater safety, solid-state batteries, as the core direction of next-generation energy st...
Energy Storage Market Poised for Explosive Growth
Currently, the global energy system is undergoing a profound green revolution. Renewable energy, represented by photovoltaic (PV) and wind power, is developing rapidly, gradually transitioning from a ...
Breaking News! Infor Vertical Sand Mill Shines in 2025 Dongguan First-of-a-Kind Equipment List
Recently, exciting news emerged from Infor, the official list of recognized projects for the
Performance Introduction and Selection of Mechanical Seals for Sand Mills
In the production processes of numerous industries such as chemical engineering, coatings, inks, and new energy materials, sand mills are crucial equipment that can efficiently grind and disperse mate...
MBC 2025 China Sodium-Ion Battery Conference: INFOR Named Strategic Partner
As title sponsor of a dedicated session at the MBC 2025 China Sodium-Ion Battery Industry Conference in Suzhou, INFOR presented NFPP line design and won a Strategic Partner award.
Performance and Selection of Chillers for Sand Mills
In the industrial production of new energy and new materials, sand mills are indispensable
Infor Earns High Praise Again, Leading the Lithium Battery Industry with Strength!
Recently, Infor successfully handed over the construction and completion technical documents of the 100,000-ton/year lithium iron phosphate cathode material project (grinding system) to a large custom...
Sodium Battery Grand Event is Coming - Sincerely Invite Industry Elites to Gather
Dear friends in the sodium battery industry, a top-tier event in the sodium battery field is about to kick off spectacularly! The 2025 (3rd) China Sodium Battery Industry Annual Conference will be gra...
SEVCPOWER Solid-State Battery Project Phase I Put into Production, Leading the Industry into a New Era
On November 10th, Yibin, Sichuan, was abuzz with excitement due to a grand ceremony! The commissioning ceremony of the Solid-State Battery Project (Phase I) of Sichuan SEVCPOWER Technology Co., Ltd. w...
Good News | Infor Secures Another Large-Scale LFP Project Order, Leading the Industry into a New Journey
Recently, Infor Machinery has brought another exciting news, it has successfully won the bid for the sand mill equipment package of a 65,000-ton LFP (Lithium Iron Phosphate) project from a well-known ...
1000L Vertical Sand Mill Sets Sail Overseas | Chinese Intelligent Manufacturing Shines Globally
Recently, a batch of 1000L vertical sand mills from Hubei Infor destined for overseas was successfully shipped. This project involves a tens-of-thousands-ton lithium iron phosphate project located in ...
India International Battery & Energy Storage Expo 2025: INFOR in New Delhi
At the 2025 India Battery & Energy Storage Expo in New Delhi, INFOR's vertical bead mill drew strong interest and INFOR reached preliminary agreements with local companies.
Analysis of the Characteristics of Zirconia Beads and Their Application in Sand Mills
In the field of industrial fine grinding and dispersion, zirconia beads serve as the core grinding medium. Owing to their exceptional physicochemical properties, they have become a key material for ac...
Good News | Infor Successfully Recognized as a National ”Little Giant“
Recently, the Ministry of Industry and Information Technology of the People
Valves: Types, Performance and Use in Bead Mill Production Lines
Gate, globe, ball and butterfly valves compared, the performance criteria that matter, and how valves control feed, pressure, temperature and discharge in bead mill lines.
4th Iron Phosphate and LFP Industry Chain Summit, Changsha: INFOR on Show
As a sponsor of the 4th Iron Phosphate and LFP Industry Chain Summit in Changsha, INFOR presented its vertical bead mills and LFP application cases; high-compaction LFP was a key topic.
Diaphragm Pumps: Performance and Applications in Bead Mill Lines
How pneumatic and electric diaphragm pumps work, what materials they use and why their features make them the standard transfer pump in bead mill production lines.
INFOR Bead Mills at The Battery Show North America in Detroit
At The Battery Show North America 2025 in Detroit, INFOR's vertical bead mill drew strong interest and INFOR signed preliminary cooperation agreements with several US companies.
Invitation: The Battery Show North America 2025, Detroit, Booth 2234
INFOR will exhibit its latest bead mills at The Battery Show North America in Detroit, 7-9 October 2025, booth 2234, and visit US materials customers.
CLNB 2025 Asia Battery Materials Cooperation Salon, Seoul: Event Review
INFOR was the exclusive bead mill co-organizer of the SMM Asia Battery Materials Cooperation Salon in Seoul, where its Korean adviser presented bead mill applications for new energy materials.
INFOR Wins Bead Mill System Order for a 200,000-Tonne LFP Project
INFOR has won a bead mill system order covering tens of thousands of tonnes of capacity in a leading company's 200,000-tonne-a-year LFP project.
India's Lithium Battery and New Energy Market
An overview of India's lithium battery and EV market: demand, energy storage, resource and cost advantages, policy support and the local and foreign players building capacity.
Invitation: India International Battery & Energy Storage Expo 2025
INFOR will exhibit in Hall 3 at the 2025 India International Battery & Energy Storage Expo on 30 October, with an overview of India's EV and battery market.
INFOR Installation Team Commended by LMFP Customer
An LMFP customer sent INFOR a letter of commendation praising the teamwork, installation skills, quality control and problem-solving of its project team.
K Battery Show 2025: INFOR Korea Presents 50,000-Tonne LFP Vertical Line
At K Battery Show 2025, INFOR Korea showed a model of a 50,000-tonne LFP vertical bead mill line and reached cooperation intentions with several customers.
INFOR Ships a Batch of 1,000 L Vertical Bead Mills
INFOR Hubei has shipped a batch of 1,000 L vertical bead mills to a customer site, another large-scale application of its 1,000-litre vertical mill, now also used on lines in Korea.
Invitation: Asia Battery Materials Cooperation Salon, Korea
INFOR co-organizes the Asia Battery Materials Cooperation Salon in Korea on 26 September with SMM, presenting a bead mill process talk and a booth.
How Bead Mill Main Shafts Are Made: The Precision Behind the Machine
The main shaft is the heart of a bead mill. From alloy steel selection and forging to machining, heat treatment, surface treatment and dynamic balancing, how a high-quality shaft is made.
Variable-Frequency Drives in Bead Mills
How variable-frequency drives give bead mills precise speed control, soft starting, energy savings, protection and intelligent control.
The Rise of India's EV Market and Its Challenges
India's EV market is growing fast with strong government incentives, local players such as Tata and foreign investment, but battery supply, charging infrastructure and price sensitivity remain challenges.
Invitation: K Battery Show 2025, Goyang, Korea, INFOR Booth B-74
INFOR Korea will exhibit its high-end vertical grinding technology and complete line solutions at K Battery Show 2025, KINTEX Goyang, 10-12 September.
Disruptive Applications of Nanomaterials
Why materials behave differently at the nano scale and how nanomaterials are changing batteries, chips, medicine and space technology.
Ceramic Parts for Bead Mills: Performance and Selection
Zirconia, alumina or silicon carbide? How to choose bead mill ceramic parts by material, size, shape and supplier quality.
INFOR Bead Mill Technology at the 2025 Advanced Lithography Technology Symposium
At the 2025 Advanced Lithography Technology Symposium in Suzhou, INFOR presented the advantages of its vertical bead mills for photoresist grinding.
The State of the US New Energy Vehicle Industry
US EV sales hit a record in H1 2025 but slowed in Q2 as tax credits neared expiry; an overview of policy, automakers, the battery supply chain, Chinese partnerships and INFOR's US plans.
INFOR Vertical Bead Mills for Photoresist Production
Why photoresist needs nano-scale, uniform particles and how vertical bead mills deliver grinding efficiency, precise size control, cooling and easy cleaning.
INFOR Wins 1,000 L Vertical Bead Mill Order for a Major LFP Cathode Line
INFOR has won the bead mill procurement for a well-known company's large phosphate-based cathode material line, centred on 1,000 L vertical bead mills.
Battery Asia Hong Kong: INFOR Shows 6 L Vertical Bead Mill and 50,000-Tonne LFP Line Model
At The Battery Show Asia in Hong Kong, INFOR exhibited a 6 L vertical bead mill, a model of a 50,000-tonne LFP line with 1,000 L vertical mills and its SWCNT production line designs.
Europe's New Energy Vehicle Industry and Supply Chain in 2025
European EV sales are growing fast while Chinese automakers, battery makers and materials suppliers build plants in Hungary, Spain and Turkey, strategies, challenges and outlook.
The State of Indonesia's New Energy Vehicle Industry
Indonesia is building a complete nickel-to-EV supply chain with tax incentives, open foreign ownership and major investments from CATL, LG, BYD, Huayou and others, plus the challenges ahead.
Single-Walled Carbon Nanotube Market Overview: A Materials Revolution at the Tipping Point
A full overview of the SWCNT market: properties, history, market size and regions, leading producers, prices, capacity expansion, applications in batteries and beyond, and the challenges ahead.
INFOR Receives Customer Letter of Commendation for LFP Project
A leading lithium battery customer sent INFOR a letter of commendation after an LFP production line project was delivered on time and exceeded expectations.
Preventing Metal Contamination in LFP Cathode Material Plants
How metallic foreign matter harms LFP batteries and how to control it at the grinding stage and across the plant: equipment materials, demagnetization, coatings, clean-room environment and staff rules.
The Role of Vertical Bead Mills in Solid-State Battery Industrialization
Sulfide solid electrolytes need sub-100 nm grinding with tight distribution and low contamination; vertical bead mills are becoming key equipment for scaling up solid-state batteries.
Invitation: Visit INFOR at Battery Asia (TBSA), Hong Kong, Booth 5A14
INFOR will show its vertical bead mill, dry bead mill and SWCNT equipment at The Battery Show Asia in Hong Kong, 15-17 July, booth 5A14.
Vertical Bead Mills for Silicon-Carbon Anode Materials
How vertical bead mills nano-size silicon, disperse it in carbon, control morphology and enable surface modification for silicon-carbon anodes, with the advantages and challenges.
Vertical Bead Mills for Ceramic Materials
Why vertical bead mills suit ultrafine ceramic powders and slurries: efficiency, narrow distribution, dispersion, temperature control and purity, plus the key process parameters.
The Battery Show Europe 2025: INFOR Vertical Bead Mills Win Interest in Stuttgart
At The Battery Show Europe in Stuttgart, INFOR's vertical bead mill attracted strong interest from European customers, and INFOR announced its upcoming European office.
XTC New Energy Chooses INFOR Vertical Bead Mills Again
INFOR has won the grinding equipment contract for a new finished-product grinding process at XTC New Energy in Ya'an, continuing with INFOR vertical bead mills after a successful earlier project.
Bead Mills for Separator Ceramic Coating Slurries
How bead mills disperse alumina and boehmite coating slurries for lithium battery separators: requirements, nano dispersion, intelligent control and high-efficiency production.
Invitation: Visit INFOR at The Battery Show Europe 2025, Stuttgart, Booth 9-D66
INFOR invites customers to The Battery Show Europe in Stuttgart, 3-5 June 2025, booth 9-D66, and will open a European office.
CIBF 2025 Shenzhen: INFOR Shows Four Bead Mill and SWCNT Product Families
At CIBF 2025 in Shenzhen, INFOR presented its 1,000 L vertical bead mill, AI voice bead mill, dry bead mill and single-wall carbon nanotube equipment at booth 3T063.
2025 China Battery Supply Chain Going Global Summit Concludes in Shenzhen
As a strategic partner of the summit, INFOR exhibited and presented its global strategy, with branches in Korea and Morocco, agents in Japan and Indonesia and offices planned in Europe and the US.
Invitation: 2025 Global Summit on Taking China's Battery Supply Chain Overseas
INFOR will speak and exhibit at the 2025 China New Energy Battery Industry Chain Going Global Summit in Shenzhen, 12-14 May.
Invitation: Visit INFOR at CIBF 2025, Shenzhen, Booth 3T063
INFOR invites you to CIBF 2025 in Shenzhen, 15-17 May, booth 3T063, to see its 1,000 L vertical bead mill, AI bead mill, dry bead mill and SWCNT equipment.
Indonesia Battery & Energy Storage Expo 2025: INFOR in Jakarta
INFOR exhibited at the 2025 Indonesia International Battery & Energy Storage Expo in Jakarta, its third overseas show of the year, and has an office and agents in Indonesia.
The Five Core Components of a Bead Mill (Sand Mill)
What a bead mill is made of: the grinding unit, drive, cooling system, auxiliary feed and discharge equipment and the control system, and what each one does.
CLNB 2025 New Energy Expo: INFOR Named Tier-1 Supplier of Core Lithium Battery Equipment
At CLNB 2025 in Suzhou, INFOR received the award for Tier-1 Supplier of Core Lithium Battery Equipment.
Lithium Manganese Iron Phosphate (LMFP): Structure, Performance and Preparation
An introduction to LMFP cathode material: its olivine structure, advantages and drawbacks compared with LFP, and liquid-phase and solid-phase preparation routes.
INFOR Wins 1,000 L Vertical Bead Mill Line Order for a 90,000-Tonne L(M)FP Project
A leading state-owned enterprise has again chosen INFOR, ordering a 1,000 L vertical bead mill system, feeding, pre-mixing, grinding and demagnetization, for a 90,000-tonne LFP/LMFP project.
INFOR Launches Dry Bead Mill, AI Voice Bead Mill and SWCNT Equipment
At the 2025 China Solid-State Battery Summit in Suzhou, INFOR launched a dry bead mill, an AI voice-controlled bead mill, SWCNT arc furnace and CVD systems and a silicon-anode fluidized bed.
LFP Process Routes Explained: Iron Phosphate, Ferrous Oxalate and Liquid-Phase Methods
A comparison of the three main LFP production routes, iron phosphate solid-phase, ferrous oxalate solid-phase and liquid-phase synthesis, and where each has a cost advantage.
Invitation: 2025 China Solid-State Battery Technology & Industry Summit, Suzhou
INFOR co-hosts the 2025 China Solid-State Battery Technology and Industry Development Summit in Suzhou, 8-10 April, with a dedicated session and a live bead mill demonstration.
Structure and Application of Single-Wall Carbon Nanotubes
1. What are single-wall carbon nanotubes? Why is it attracting much attention?Single-Walled Carbon Nanotubes (SWCNTs) are seamless tubular structures curled from single-layer graphene sheets. The diam...
Good News | Infor Once Again Won the Order for the Sand Grinding System of Lithium Iron Phosphate Material in Ten Thousand Tons
Recently, Infor once again won the attention of the market with its extraordinary strength, reached a cooperation with a well-known new energy material company in Guizhou, and successfully won a 10,000...
Effects and Solutions of Metal Foreign Matter on the Positive Electrode Material of Lithium-Ion Battery
Lithium iron phosphate cathode material has the advantages of excellent thermal stability, good cycle life, electrochemical stability, and environmentally friendly, making it one of the most ideal cat...
Infor South Korea Branch Has a Good Start and Vertical Testing Equipment Has Been Successfully Delivered
Recently, Infor South Korea Branch ushered in a good start as soon as it was established - a set of advanced vertical testing equipment was successfully sent to the customer site, and the staff were in...
Current Situation and Development of Sulfide Solid Electrolytes
1. Solid electrolyte: The current technical route is not determined, each has its advantages and disadvantages2. Sulfide: The highest ionic conductivity and great development potential➢ Sulfide elect...
Properties of Three Cathode Materials for Sodium Ion Batteries
Sodium-electrode materials are divided into three categories, each with its characteristics and face challenges. Different microstructures lead to differences in diffusion paths and energy barriers of...
Infor South Korea Branch Opened Grandly
The spring breeze is gentle, and everything is revived. On March 8, Infor Machinery South Korea Branch ushered in its brilliant opening! This new branch located in Seoul, the capital of South Korea, no...
InterBattery Korea: INFOR High-End Bead Mill Technology on Show
At InterBattery in Seoul, INFOR presented its screen-free vertical bead mill at booth D760, met customers from around the world and reached preliminary cooperation agreements.
Performance requirements of LFP materials
The particle size and particle size distribution of LFP materials have a crucial impact on material performance. LFP has a one-dimensional ion channel, so it is necessary to shorten the diffusion dist...
Chinese Lithium Battery New Energy Companies Going Overseas: Opportunities, Challenges and Risks Analysis
In recent years, the global new energy vehicle market has flourished, driving the rapid growth of demand for lithium batteries. As the world
Infor & Co., Ltd.: Strong Alliance to Deepen the Japanese Market
INFOR has joined forces with a well-known Japanese company, authorising it to exclusively sell INFOR's sand grinding products in Japan, a major step in its internationalisation strategy.
INFOR Vertical Bead Mills Draw Crowds at Battery Japan
At Battery Japan in Tokyo, INFOR's screen-free vertical bead mill attracted experts and buyers, and INFOR shared progress on high-flow mills, line automation and control software.
Infor South Korea Seoul Branch Is About to Open. Welcome to Visit and Guide
In this spring season, Infor announced an exciting news to everyone - Infor South Korea Seoul Branch will be open for glory! The Korean branch is scheduled to open on March 8. This is not only the bir...
Battery Japan Opens in Tokyo: Visit INFOR at East Hall 5
INFOR invites customers to Battery Japan, Tokyo, 19-21 February, booth E51-12 in East Hall 5.
How to Select Bead Mills (Sand Mills) for New-Material Production Lines
A practical checklist for choosing bead mills for LFP and other new-material lines: production goals, mill and rotor types, performance, materials, automation, safety, maintenance and cost.
Year-End Summary | the 2024 Billionaire Year-End Summary Meeting Ended Successfully
At the end of the year and the beginning of the year, Infor Company ushered in a unique annual event. The 2024 Annual Summary and 2025 Work Plan Conference with the theme of
Main Technical Requirements of Sand Mill
Main technical requirements of sand mill1. Basic equipment configuration:1) Effective volume: Calculated based on annual output demand, currently, a single unit in the new materials industry is genera...
2025 Exhibition Calendar: INFOR on the Global Stage
INFOR's 2025 exhibition schedule: Battery Japan, InterBattery Korea, Indonesia Battery Expo, CIBF Shenzhen, The Battery Show Europe, Battery Asia Hong Kong and The Battery Show North America.
Good News | Infor Won a Large Order of 10,000 Tons in the Conductive Agent Industry
At the end of the year, exciting news came from Infor Machinery. With its excellent technical strength and excellent solutions, it successfully cooperated with well-known companies in the conductive ag...
Infor Machinery's December Ended Perfectly with Shocking Shipment of Large Quantities of Direct Drive Sand Mills
As the year-end bell approaches, Infor marked the end of 2024 with a shipment feast. December, a season shrouded in cold, is full of fiery atmosphere due to the busy shipping scene. The large batch of ...
CBIA2024 | Infor Wins the Annual Innovation Enterprise Award, Leading the Global Innovation Trend in Sand Grinding Technology
INFOR. The 9th International Power Battery Application SummitFrom November 18th to 20th, the highly anticipated 9th Power Battery Application International Summit (CBIS2024) grandly opened in the inte...
Quality Leads the Future, Infor Vertical Sand Mill Continues to Ship
INFOR. Quality Leads The FutureThe golden autumn brings refreshing breeze and the autumn mood deepens! In this harvest season, Hubei Infor also ushered in the peak period of shipment. Batches of caref...
Dialogue with Southern Finance Omnimedia to Discuss Industry Development
High-growth Enterprise TheoryRecently, Southern Finance Omnimedia Group launched the 2024 fifth season of the
November Newsletter Invites You to Gather
INFOR. Choose Infor for High-End GrindingIn November, Infor will focus on participating in two conferences, covering the fields of lithium batteries, sodium batteries, solid-state batteries, etc. We s...
A New Era for Solid-State Batteries | Infor Ultrafine Grinding Technology Leads the Way
INFOR. A New Era of Solid-State BatteriesIn this refreshing autumn, the historic city of Ningbo hosted a grand event for the technology community: the
Carbon Rope's Unlimited Future | Infor Leads a New Chapter in Carbon Material Grinding Technology
INFOR. Carbon Rope Has An Infinite FutureThe highly anticipated 6th Carbon Materials Technology Summit Forum was successfully held in Huzhou from October 15th to 17th. This event, meticulously organiz...
